I got a lot of the info for this project from over there. Under the “Main” tab, make sure your total memory is 1,536 megabytes. Reassemble the computer and tap F2 while it’s booting to enter the BIOS.
Carefully lift the board up and insert the RAM. The RAM slot is on the underside of the motherboard in the lower left-hand corner.
#Ram upgrade acer aspire one nav50 install#
Unscrew the two screws near the Wi-Fi module, unplug the audio cable, and disconnect the SSD ribbon. This machine only has one memory slot, to upgrade you may need to remove the original memory and install the new memory in its place. Use a flat object (like a flathead screwdriver) to push each of the three tabs toward the screen while using another flat object to gently pry the keyboard upwards.ĭisconnect the keyboard and trackpad ribbons, followed by the following six screws. In such models, you just have to insert a DDR2-400/533 memory module into the empty SO-DIMM slot. Older Aspire One models come with only the 512 MB memory soldered on the motherboard. Two of them are hidden under the rubber feet. To upgrade the Aspire One's memory, all you have to do is remove the SO-DIMM module and replace it with one with a higher memory capacity. Remove the battery and the following eight screws. Your pc must be configured to boot from a usb drive, which can be selected from the boot menu or bios/uefi.
#Ram upgrade acer aspire one nav50 driver#
Driver wifi acer aspire one nav50 windows xp.
0 kommentar(er)
